HP Color LaserJet Pro MFP 4301fdn.
Setup was not friendly…
04/30/2024 03:16
After multiple attempts to reset driver and print, my printer still would not print in color. It would copy in color, but not print. I tried printing different ways and nothing. Finally I troubleshot with HP and it took them 2 hours to fix my printing issues. First issue, although I installed driver, within the driver setting, the “color” option was not selected and was on auto-config. You’d believe it means an auto adjustment for color vs b/w print, but no it had to be changed. The pin did not work and had to reset the device which too awhile. Finally for prints, it was showing I was online, I’d print then the print queue says I’m offline. Then rep has me turn printer off and on to work, multiple times. It was frustrating I needed to turn the printer off and on again to make it work again. Also, please do not forget the printer is not wireless and needs to be hardwired. I did not want to hard wire direct into router as my office and router are in different rooms, so I bought a network extender with Ethernet port and connected the printer to it and it successfully works via basically a WiFi extender.
As for the printer, I made business cards on 93 lb paper and it worked, I made a copy of a photo I ripped out of a magazines & noticed the windows look different and copying paper with shimmery wording doesn’t show up well either. The good now, printer was very fast to print, once it was able to print, business cards look nice, and has a copy and fax option. If you can get past the hurdle of set up, it’s a good product.
Samsunghoming1
Arlington , Spojené státy americké
Age: 34
Gender: Female